Team Spartan Cookies & Milk Forums
Stargazer Basics - Printable Version

+- Team Spartan Cookies & Milk Forums (https://teamscm.co.uk)
+-- Forum: Garry's Mod (https://teamscm.co.uk/forum-4.html)
+--- Forum: Server Information (https://teamscm.co.uk/forum-5.html)
+--- Thread: Stargazer Basics (/thread-293.html)



Stargazer Basics - Person8880 - 03-05-2014

What is Stargazer?
Stargazer is a replacement to Environments/Spacebuild that I have developed for the server.

There are 3 main principles behind it.
  1. Resource storage and generating depends on ship size.
  2. All resource generation must be done on a ship with a ship core.
  3. Resources are finite and will run out in space eventually without any inventive thinking.
Note: images below are for demonstration purposes only. You should set up the cores on your ship/station, not on flat ground.

1. Resource Cores
These are storage and generator hybrid devices. They use your entire ship as storage space, and will generate at a rate based on the size of your ship.

You will need one energy, one refinement and one water core. There is a simple chain of needed resources:

Energy -> Water -> Deuterium -> Energy

Energy core
To start with, the energy core will generate from solar power. This is enough to start collecting water. This should be the first thing you turn on (by pressing use on it).
   

To produce energy at a faster rate, you need deuterium. This is refined from water.

Water core
The water core provides storage for water. Press use on the water core to spawn its collector.
   

Take the collector, and place it into water. Now turn the collector on by pressing use on it, and you should start to see you are collecting water.
   

How fast you collect depends on how far away this collector is from the water core.

Refinement core
Now with water available, you can start refining it into deuterium and oxygen. Turn on your refinement core, and you should start to slowly refine deuterium.
   

You'll want to fill up on deuterium before going out into space, as once you're out there, you won't be able to produce it infinitely.

2. Energy control
You can fine tune how much energy certain devices use in your network. You can either do this through wire, or by pressing use on your resource node.
   

3. Life Support
Life support is very simple. Once you have energy and oxygen, add an LS core to your ship (under the Stargazer > Life Support tool). Connect it to your resource node and turn it on. You may need to wait a minute or two for larger ships to fill up with oxygen.

Note that if you add more props to your ship/station after turning the LS core on, you'll need to turn it off and on again for it to pick up on them and provide atmosphere to them.

4. Valves
In order to connect resource nodes, you need a resource valve. This allows you to flow resources from one node to another.

Valves connect two resource nodes that you are the owner of together. To link, take the link tool and first select the valve, then right click the first node. Select the valve again, and right click the second node. Now you should see a "Push Network" and "Pull Network". Note that each node must be within 2048 units of the valve to remain linked.

Flow rate is limited to 5000 units of each resource per second maximum. Press use on the valve when you have connected it to 2 nodes to set the flow rates. Push sends from the first node to the second ("Push Network" to "Pull Network"), while pull does the opposite.